Here is detailed information of how to use your meter
the quickest way possible. You can dowload the all new 
easy to use manual in this section.

1. Press power on.
2. Press the FINDING BUTTON.
3. Scroll to entry/satellite you want.
4. Press OK /F4 to see spectrum screen.
5. Press OK /F4 to see the search screen.
Optimise your antenna and then you have
an option to either view the TV chanel Free
to Air only. Or Press the FINDING button to
return directly to the sat list to the position
previously selected. From here you can select
the next test to make and go quickly to the
search screen, by pressing the OK button.

EASY EDIT AND ADD AN ENTRY

1. Press power on.
2. Main menu. Press arrow left/right to selct Edit
/Add entry. or go direct with key 2 on the keypad.
3. Edit in all of your new data and press SAVE/F3
Note: When you edit in the new data please be
aware that : Frequency 11700 or above you need
22Khz set to ON and LO (Local oscillator) setting
to 10600. Frequency of below 11700 ,22Khz OFF
LO (Local oscillator) setting to 9750. Finally
Scroll the arrow on screen to SAVE.
4. After pressing SAVE/F3 move arrow up/down
to select were to add the new entry.
5. Press OK and then name the entry using the
Numerical keypad and the OK button. After
you have named the entry press OK again to
save the entry . Press FINDING to or EXIT to
resume operation of the meter.

Note: You can overwrite any entry by hand or
add a new entry if you can see Null spaces in the
list. Very easy, Very fast. Only with SatCatcher

Here is detailed information of how to use your meter
the quickest way possible. We know user manuals can
be hard going to read so here is the easy way to fast
Antenna installations.

1. Press power on.
2. Press the FINDING BUTTON.
3. Scroll to entry/satellite you want.
4. Press OK /F4 to see spectrum screen.
5. Press OK /F4 to see the search screen.
Optimise your antenna and then you have
an option to either view the TV chanel Free
to Air only. Or Press the FINDING button to
return directly to the sat list to the position
previously selected. From here you can select
the next test to make and go quickly to the
search screen, by pressing the OK button.

EASY EDIT AND ADD AN ENTRY

1. Press power on.
2. Main menu. Press arrow left/right to selct CONFIG
3. Edit in all of your new data and press SAVE/F3
Note: When you edit in the new data please be
aware that : Frequency 11700 or above you need
22Khz set to ON and LO (Local oscillator) setting
to 10600. Frequency of below 11700 ,22Khz OFF
LO (Local oscillator) setting to 9750.
4. After pressing SAVE/F3 move arrow up/down
to select were to add the new entry.
5. Press OK and then name the entry using the
Numerical keypad and the OK button.

Note: You can overwrite any entry by hand or
add a new entry if you can see Null spaces in the
list. Very easy, Very fast. Only with SatCatcher.

This guide is viewable when you open the case of every meter.
Press the RED button to switch on the meter.
Press NAVIKEY left to display UTILITY then press F4
Use F1 and F4 keys to scroll to edit your Longitude and Latitude. Enter your settings with the F1 key. Restart the meter with the power button.
Press the FINDING button to display the list of Satellites.
Press the SET button repeatedly to view the list by alphabet or Satellite Arc , East to West .
Press the F1 or F2 arrow button to scroll the list. Navikey Arrow UP/DOWN KEYS will move the list page by page.
Press the ENTER button on the desired entry.
First Screen giving Dish set up Parameters.
Press the F4 button , this giving strength and quality reading .
Press F4 again when signal Quality is optimum. to view full readings.
Press F4 to save this reading in Data base log
Press FINDING button at any time to select the next parameter to test.
Repeat the above proceedure for each alignment.

Press the RED BUTTON to power up.
Press the FINDING button to select the satellite list.
Arrows UP/DOWN to highlight the required satellite.
Press F4 to see spectrum page.
Move antenna until OK is indicated on screen.
Press F4 to see search screen to fine tune.
Press FINDING at any time to go directly back to sat list.

To edit the preconfigured file for the digipro II follow the steps below.
This will allow you to : Edit an existing entry, Add a new entry, or Delete
an entry.

1. Power on the meter RED Button
2. Press SET Button. Entry list is diplayed
3. Name:  (press enter to edit name)
4. LO:  (enter your local oscilator detail ) 9750 for frequencies less
than 11700. 10600 for frequencies higher than 11700.(press enter to edit )
5. F: ( press enter button to edit frequency required)
6. SR: ( press enter button to edit symbol rate)
7. LNB: (scoll down to lnb then use arrow left and right to select lnb voltage.
 Horizontal being 18volt Verticle being 13volt)
8. L: Longitude ( edit the position of the satellite, a - entry is for westery satellites
9. QPSK   (scroll down to QPSK then use the arrow left and right to show the
required setting )
10. Press the C/S button to select the stored entry list. Note you will see the
 (*) mark next to the entry.
11. Scroll down the list to where you want to store the settings you have created,
you can overwrite an entry or create a new entry from one of the null settings.
12. Press the ENTER button and your setting is saved. Press the Finding button
to resume use of the meter.